Make: Ribbon Burp Cloths

"So...this is for a baby to throw up on?" was the question my husband asked while I made these adorable burp cloths for a pregnant friend. His inquiry was understandable. I suppose the only explanation is that babies are cute and (gosh darnit!) everything they have might as well be cute too. Have you seen cloth diapers lately? Positively darling yet they have a not-so-pleasant purpose! I made a batch of these ribbon burp cloths a while back (for the same pal that received these baby shoes and headband) and found them to be a breeze! Embellished burp cloths are a great DIY gift for your next baby shower, especially if you are short on time and/or a beginner sewer.

Ribbon Burp Cloths

Supplies Needed:
Prefold cloth diaper (or a plain burp cloth)
Ribbon
The usual gear: sewing machine, pins, sheers, coordinating thread, iron

Measure the length of your burp cloths and add 1-inch to that measurement. Cut two ribbon pieces by that length.

Simply fold the raw ends of the ribbon down 1/2-inch and iron to keep folded (I used my hair straightener because it is a bit easier to get the fold exactly where you want it).

Lay the ribbon down on the burp cloth and pin into place. Repeat for the other ribbon.

Using a straight seam, sew along all of the edges of the ribbons.

Optional: I had a bit of ribbon leftover so I tied some sweet little bows and sewed them onto the burp cloths too.

And that's it! I look forward to more of my friends having babies so I can make more of these adorable burp cloths! Even if they are for a less-than-cute purpose.

Make: Men's Shirt Refashion

My husband has quite the impressive dress shirt collection. Currently, 47 long-sleeved dress shirts hang in his closet. If you think that's a lot, try guessing the number of ties! This set of 47 excludes a few that were recently discarded for either donation or refashioning — and subsequent move to my closet which isn't so much saving us storage space as it is moving items around. Oh well. Here is one such refashion.

I'm not really one to stay on top of fashion trends, but lately I have noticed more women wearing loose-fitting tops with cuffed sleeves. Like this NY&Co shirt. I love the look and think it's perfect for summer. So I dug through Matt's pile of discarded shirts and found one in a gorgeous deep blue tone. With a pretty clear idea of what I wanted the end result to be, away I went with my scissors and sewing machine. I am so thrilled with how this refashion turned out that I am tempted to make more just like it!

As you scroll down, you will find additional instructions and photos to (hopefully!) make everything clear. Please let me know if you have any questions.

Neckline
Begin by removing the collar and cutting the fabric to your desired neckline. In my case, I preferred a wide boatneck. Turn down and hem this newly-cut rough edge.

Sleeves
Cut off the sleeves at the spot right above your elbow. You want to make sure you have enough sleeve to roll. Now fold the sleeves up to your desired length and pin into place. I opted to sew the cuff into place (a 1/2-inch seam hidden along the interior of the sleeve) so that it wouldn't unroll willy nilly.

Now for the straps. Using the discarded fabric, cut a 1-inch wide strip (4-5 inches long) and fold it in half. Sew along the rough edge (making a narrow tube), then turn it inside out. Sew one end of the strip to the inside of the rolled sleeve  and pull it around to the outside of the sleeve, sewing this end into place too. Add a decorative button to this cover the outer seam. Repeat for the other sleeve. This is easier than it sounds; you want it to look like this:

Body
Take in the sides as needed. I wanted my shirt to have a flowing shape, so I only took in a bit of fabric around my chest. Play around with different degrees of tightness and decide what you like. Keep in mind that dress shirts don't stretch, so make sure it is loose enough that you can easily put it on and take it off.

Make: Skinny Refashion

First, a brief history. Second, a brief tutorial.

A Brief History

If you thought skinny pants were a product of the 20th century, you would be mistaken. Actually, slim-fit pants date back to the late 18th century. Not only that, they were a political statement. Radical left-wingers of the French lower class wore full-length pants tailored tightly from waist to ankle, all in response to the knee-length breeches popular among the upper class. Over the decades, the style's association has changed as often as the name, including drainpipes, stovepipes, cigarette pants, and pencil pants. Skinnies have been linked to everything from classic & subdued fashion (see Audrey Hepburn and Sandra Dee) to heavy metal and pop/rock music (see Poison and Freddie Mercury). The most recent (and current) resurgence was in response to the oversized and baggy clothing prevalent in the 1990s.

So there you go. I bet you were not expecting a history lesson today, were you?!?

A Brief Tutorial

For a while I'd been wanting to expand my skinny pant wardrobe beyond denim. Then a few weeks ago I was digging through some soon-to-be-donated clothes and noticed a pair of black bell bottoms. Inspiration struck and I was thrilled! Especially because they fit really well from the knees up, meaning the undertaking would be simple and straightforward.

If you want to skinny-fy a pair of pants, you have two options.

Option 1: Pinch and Pin
Turn your pants inside out and try them on in front of a mirror. Working your way down from hip to ankles, pin along the inside and outside of your leg, making the pant leg as tight as you prefer. After doing this on both sides, very carefully take off the pants. You can also mark along the pins for extra guidance.


Option 2: Template
Turn your pants inside out and lay them flat. Use a pair of (already-fitting) skinny pants as a template and lay them on top of your non-skinny pants. Be sure to line up the crotches (strange sentence to type, btw!) and mark where your new seams will be. Pin along those lines.

TIP: If you want to keep the "professional" seam on the outside of your pants, be sure to gather the fabric on the inside of your pant legs only!

Regardless of which option you choose, now you will sew straight seams along your markings/pins. Cut away the excess fabric, turn them right side out, and try them on. If you are unhappy with the first, repeat all of the above steps to alter as needed.

I chose the pinch and pin method and it worked great. I was pleasantly surprised by how quick and easy this project was. It makes me want to go through my closet and find more pants to transform!

Make: Baby Shoes & Headband!

My friend Sarah is getting ready to have her first baby, which is exciting for a great number of reasons--the least of which is that I've gotten to make her a handful of cute baby crafts! The toughest part was narrowing down my long list of options. These oh-so-adorable shoes and headband were too sweet to skip!

 The best part? Both projects were super simple!

Felt Slippers

You can find several slightly different patterns online. I selected one by Martha Stewart found here. I had to print it out a few times while fine-tuning the scale. You want the sole to be roughly 3 inches long.

Then you use the stencil to draw and cut out both shapes on felt fabric.  Pin the top of the shoe (marked "upper" on the template) to the sole. Now slowly sew the pieces together. Don't worry if your seam is not completely straight!

Turn it inside out and voila! A baby shoe. Now you can decide what to do with the strap. I opted to sew a tiny button on one strap and carefully cut a short slit on the other strap. Other ideas include ribbon ties (short pieces sewn on each strap) or a small length of elastic (<1") permanently connecting the straps.

We've arrived at the best part: decorating! Flowers and bows are always fun, but I wanted something less common. I stacked two circles in contrasting colors then secured them onto the shoe with a white button.

Repeat for the second shoe.


Circle Headband

Once the shoes were finished, the headband pretty much designed itself. I sewed together 12 inches of narrow elastic and continued the circle-stack motif in a line of three along the elastic. I made sure to cover the elastic seam with one of the circles. To clean up the back of the headband (and hopefully make it more comfortable for baby), I glued a thin strip of white felt along the back sides of the circles (sandwiching the elastic).

Here is a quick overview of headband sizes for babies:

• Newborn: 12 inches
• 3-6 months: 13 inches
• 6-12 months: 14 inches
• 18-24 months: 16 inches

My only regret with this project is that both are sized for a brand spankin' new baby. She won't get to rock them for very long!

 



 



Make: Dinosaur Hoodie

I cannot believe how long it has taken for me to write a post about this super adorable--ahem, I mean totally cool, big kid Dinosaur Hoodie. I made this as a Christmas present for my nephew, Colin. He loves dressing up as superheroes, so the idea of a pseudo-costume he can wear out in the real world was perfect!

I enjoy projects like this that are simple and customizable. You can make this for a boy or girl in whatever colors and patterns they prefer. You could also mix things up by using shapes other than triangles. It took me less than hour for the entire project, including cutting out the little felt pieces. Would you like to make one for the kiddo in your life? Would you rather make one for yourself? Either way, here's how!


Dinosaur Hoodie

You will need:
Hoodie
Felt
Scissors
Paper for template/stencil
Sewing supplies (sewing machine, thread, pins)

Begin by deciding how large you would like the "spikes" (or triangles along the spine) to be and draw a diamond that equals TWO of those triangles. You can also download this handy dandy template from Ginger & George. Cut out the paper template and use it to create as many felt diamonds as you want. I opted for several small "spikes" rather than a few large ones. I made twelve total.

There is a good chance that the hoodie has a seam running down the back. If so, you are in luck! Using this seam as a guide, pin the diamonds down the center of the hoodie--starting at the front of the hood and working your way to the bottom of the back of the shirt (see photo). If there is not a seam, then do your best to pin the felt pieces in a straight line.

Stitch along this line of diamond, taking care to go through the middle of each diamond.

Now fold each felt diamond in half and pin the side side together.

Finally, sew a straight seam around the edges of each triangle. I liked the idea of the spikes being flexible and flopping around as Colin runs about. But you could also reinforce the triangles with a bit of interfacing before sewing up the edges.

Do you see what's happening? Ah yes, now they are little triangles!

Now your little guy or gal is ready to transform into a dinosaur for the day!

(Don't Hate) Valentine's Day...a craft round up!

Growing up, my family celebrated Valentine's Day as, well, a family. My mom was pretty adamant that it was not a day exclusively for romance but rather a day to celebrate all sorts of love. She would make a fancy dinner for whole clan and my dad arrived home with not one but three bouquets. To this very day my grandmother, my mother, my father, my sister, my brother-in-law, my nephew, my husband, and myself all exchange candy gifts--I've even gotten my in-laws in the mix. I think this perspective takes Valentine's Day from a generally lame, pressure-filled day to a really great one. Dean Martin wasn't joking when he said everybody loves somebody sometime. Maybe that somebody is your spouse, partner, parent, friend, cat, whatever. My point is don't be a hater and join in the fun.

As I mentioned, my family has a sweet tooth so candy is the preferred Valentine's Day gift. Over the years, as our numbers have expanded so has the cost of candy! A few years back, Matthew and I began making homemade treats. This not only costs less but also allows us to give more candy to each person!

In years past, we've experimented with more elaborate recipes and combinations of treats. This go-around, however, we got back to our chocolate roots with straightforward candy molds. I bought a small set of heart-shaped molds along with several ounces of semi-sweet chocolate. Then we played around with different "extras" like wafers, sprinkles, crushed-up Whoppers, and the like. It made for a fun evening together. All of the candies were divided among plain boring sandwich bags which were instantly transformed into adorable Valentine's Day bags with these toppers designed by Thirty Handmade Days.

And this centerpiece? Easy as can be. Starting with my apothecary jars, I simply cut three heart shapes out of seasonal scrapbook paper, added smaller red paper hearts, and secured everything with yarn. I threw in some scented red candles for good measure.

I love this argyle wreath. It is wonderfully understated in a world of over-the-top, cheesy Valentine's decorations. Assembly is easy but time consuming. To begin, tie a loop of yarn around a form ring, securing it with a double knot. Then, wrap the yarn around the ring a few times and smoosh it all together so that you can't see any foam behind it. Also pull the yarn taut. Move on to the next section of foam and repeat, repeat, repeat until you have covered the entire ring. Tie one final knot on the back side of the wreath. I opted to add small felt hearts, laying them out flat on the wreath. Then I carefully wove more yarn around the wreath, taking care to make an X over each heart so they won't slip out of place.

Last is my banner. Oh, this was fun! A friend of mine posted this on Facebook January 31st and I knew I wanted to try it. It's sort of like an advent calendar for Valentine's Day, where each envelope has a fun activity for you and your partner (or family, friends, etc). I made a list of easy, low-key activities ranging from a picnic dinner to a martini night. Considering I threw this together at the last minute and I'm terrible at writing in bubble letters, I think it turned out nice enough.

That's it for my Valentine's Day round up; I hope this holiday finds you in good spirits and ready to share some love with those around you!

Make: Sweatshirt Refashion!

Cute + Comfortable. These are my two goals in fashion. I spend most of my work days accomplishing the first, but generally not the second. So as soon as I get home I want to ditch the dress pants and fancy-lady shoes for my ripped jeans and moccasin slippers. To top it off? More often than not, an oversized hoodie sweatshirt. This moves me closer to my second goal (comfortable) yet further from the first (cute). Surely there is some way to achieve both!

My sweatshirt collection was huge and dated all the way back to my Freshman year of high school.
 I recently came to terms with the fact that I do not need a dozen hoodies taking up limited (and therefore precious) closet space. Thus I resolved to get rid of several, keep a few in tact, and try my hand at refashioning. Overall, I was successful in these endeavors. I have reclaimed some closet space and ended up with some cute redone tops.

Shawl-Neck Sweater

I am so proud of this project! It was inspired by a picture I came across online and wanted to recreate. I had my doubts that it would work, since I basically drew a sketch and started cutting away at the material. Considering that I was working with the limitations of an already-made top, I think I did a fine job turning an oversized, appliqued hoodie into a cute shawl-neck sweater!




Despite my desire to recreate the inspiring photo (left),
I just couldn't bring myself to hold my hands in such an awkwardly unnatural way.
Instead, I settled with cropping off the top 3/4 of my face.

You will need:
Hoodie
Coordinating thread
Button(s)
Pins
Scissors
Sewing Machine

Begin by removing the front pocket. Doing this actually required me to take off the entire band around the bottom of the sweatshirt (which I later re-attached). Also remove any unwanted embroidery with a seam ripper or small shears; if your sweatshirt has screen printing--sorry, that is not going anywhere.

I think the rest is easier to explain/understand with visual representation.

 

Note: I folded under the raw edge (of the little flap) for a cleaner look but this step is not necessary since the material won't fray.

If your sweatshirt already fits then you are done! If yours (like mine) is too big, then do the following:

Turn the shirt inside out and lay flat. Take a shirt that does fit (preferably another sweatshirt) and lay it on top. Line up the shoulder seams and mark where to take in the sleeves and/or sides. Also pin along this marked line. Sew along the marked lines and cut away the excess material. Turn it right-side out, try it on, then make any needed adjustments.

Ah, American Eagle! I told you my entire sweatshirt collection dates back to high school.

Now you are good to go! Get ready to be cute and comfortable!

Make: Reusable Swiffer Cover

I like my Swiffer Sweep as much as the next person, but I hate burning through so many disposable covers. Not only do they generate more waste, the cost adds up too! So I immediately jumped on board when I came across a picture on Pinterest of a reusable cover. This is, of course, in tandem with my decision to start making more of my household cleaners. I briefly looked for instructions (without any luck) but quickly decided that I could wing it on my own.

Reasons you should make this:

• This is a very fast DIY undertaking. Start to finish, the quickest sewing project I've done.
• Dual purpose: you can use it to sweep or mop (using a batch of homemade All-Purpose Cleaner!).
• It will save you money.
• It works! I've been using this for a month and it gets the job done.

Tip: take a few extra minutes to make a few of these covers, so you don't have to rush to do laundry in between floor-cleaning sessions.

Materials Needed:
Fleece, 6" x 17" (for a standard-size Swiffer Sweeper)
Thread
Sewing machine
Pins
Scissors

Begin by cutting the fleece into 3 pieces:
A: 6" x 10.5"
B: 6" x 3"
C: 6" x 3"

The large rectangle will be the base/bottom of the cover. Take one of the smaller pieces and line it up with the sides/corners of the base. Pin into place.

Repeat this with the remaining piece, lining it up with the opposite end of the base.

Disregard the excess fabric on the edge of my cover; I was still figuring out how large to make each piece.
Also, you do not need to whip out the sweeper for measuring/fitting, as I did.

Now you just sew along the outer edges, making little pockets on each end. It should have be loose fit in order to easily get the cover on/off of the Swiffer.



Seeing it in action!

I hope you will give this reusable Swiffer cover a try. I've been very pleased with the results and suspect you will be too!

Make: Tulip Skirt

I think it's time to take a break from all of the holiday crafts and share this fun "Tulip Skirt" with you!

I don't want to get into the habit of recreating tutorials, like this one from Cotton & Curls, but I actually had a difficult time following her written instructions. So I re-wrote the directions for my own sake and have decided to share this more detailed version with you.

Funny story: Although I just made this skirt a few weeks ago, I feel like it counts as vintage! You see, over the summer my grandmother (or rather, Mimi, as she is known in my family) found a bag of untouched fabric that had been burried in her closet for years. It had been so long that she couldn't remember what she had intended to do with it. While investigating, we found a faded receipt stating April 1993! That's a whopping nineteen years! She gave me the fabric with the stipulation that I make something nice with it. I think I was successful.

Supplies:
1.5 yards of flowy fabric
Thread
Buttons (2-3)

1. Cut the piece of fabric in an elongated half-oval. The top line of the shape should be your waist measurement x 2, then add another 12-16 inches (since it will wrap around your waist). The larger this measurement, the more gathered the final product will be. I used another skirt to determine the length.

2. Hem the curved edge.
3. Gather the top of the skirt, enough that it equals your waist measurement + 12-16”. If you don't know how to gather fabric, here is a great tutorial.

4. Bias Tape: decide how wide you want the waistband, then multiply that number by 2, and add an extra inch. Cut a strip of fabric (length = your waist measurement + 12-16") with that final width. Hem the short edges. Fold it in half lengthwise and iron. Then fold down both of the raw edges 1/4 inch and iron—DO NOT HEM.

**See Note**

5. Pin and sew one of the folded-under edges to the inside of the skirt (along the top) and sew a straight stitch.

6. Fold the bias tape over the waistband to the outside of the skirt and pin down. Sew a straight stitch along the edge of the waistband.

7. Add 2 buttons to the front of one end, 6" to 9" apart (depending on how much you want the skirt to cross over).

8. Now make 2 buttonholes the same width across on the other side. You can make extra holes to adjust waist size.

 **Note: If you want one of the buttons to be hidden (like mine), sew a single buttonhole on just one side of the waistband before step 5.



I felt oh-so-awkward taking these photos.

Make: $2 Centerpiece

This year's Christmas Centerpiece is brought to you by the dollar store. Oh, how I love the dollar store! These warm feelings go all the way back to my childhood. In an effort to teach my sister and me the joy of giving, my mom would take us to the dollar store to buy Christmas or birthday presents for the family. We roamed the aisles, painstakingly deciding between tchotchkes. To this day, my dad still has little ceramic kittens and puppies displayed in his office. I imagine his co-workers are surprised by his apparently juvenile taste in office décor. That's the love of a father for ya...

Where were we? Oh right, my centerpiece. I must admit that I completely stole this concept from my friend Mary, who originally got the idea from Decor Chick. It is so easy!

Simply glue a glass candlestick holder to a (not-too-tall) glass vase. That's it. I spent more time  getting the superglue off my fingers.

I guarantee that you will find these two objects at your local dollar store. Mine were even cheaper because I have approximately 1 million vases leftover from my wedding. While you are at the store, why not look for filler to put in the vases? I made three apothecary jars and filled each with different holiday things: peppermints, colorful ribbon, and ornaments. Other ideas include bells, candy, bows, faux snow, strings of lights, berries, twigs, or pinecones.

The best part? As I explained in my fall décor post, glass containers easily transition between seasons. Before long I'll be brainstorming springtime fillers!

Make: No-Sew Ruffle Tree Skirt

For the past two Christmases, my make-shift tree skirt has actually been a few swatches of plaid fabric draped around the tree's base. Was this cute? Not really. However, I just couldn't bring myself to settle for an expensive (or cheap but ugly) store-bought skirt, so I draped the fabric and quickly covered it with wrapped gifts. Then last year, immediately after Christmas, I stumbled upon this fantastic tutorial on HG-TV for a no-sew ruffle tree skirt. I was positively smitten!

Fitting adjectives for this project: beautiful, sophisticated, easy, time-consuming, and finger-burning.

That last part is thanks to the massive amount of hot glue sticks I used to create this beauty. I was legitimately surprised at how long it took to make this, but I think that could be shortened with two easy steps: 1) use wider strips of fabric and 2) don't be a crazy perfectionist. Remember, it will be under your Christmas tree and admired from afar. That being said, I'm very happy with the final product!

Materials Needed:
Large square of fabric (mine was 3 ½ ft x 3 ½ ft)
4 yards of additional fabric
Measuring tape
Sharp scissors
Hot glue gun
Hot glue sticks

Create Base:
Fold the large square of fabric into quarters. Now cut the outer edge into a quarter circle and cut a much smaller quarter circle out of the remaining point (see photos below). When you unfold it, you should have something reminiscient of a giant donut shape. Cut a straight line from the outer edge to the inner circle (so you can actually wrap the thing around your tree!).

Create Ruffles:
Using fabric shears, cut the remaining fabric lengthwise into 2" wide strips.

With your preheated glue gun, apply a thin line of glue along the edge of the circle--no longer than a few inches. Working quickly (before the glue hardens!), press a strip of fabric on the glue, pinching it as you go. You should have a tiny ruffle before you!

Continue this process around the entire skirt, starting each new row approximately 1 1/2 inches above the previous one (agjust this accordingly if using wider strips). Round and round you'll go till the entire skirt is covered.

And there you have it! Depending on your style, you can make it in one solid color (as I did), complementary colors, fun prints, or (if you're feeling really ambitious) an ombre design with slightly changing shades every few rows.